Blog

My blog posts will go here.

Sites I use for 3D Printing

Sites I use for 3D Printing

I recently purchase a home 3D printer in the last year. I was blown away at all the things I could print with it, some things that would help around the house and some that were just for fun. When you get a 3D printer you want to go out and print a bunch of stuff you may not know where to go and how to print it. Of course each 3D printer is different in the way they print, whether it is over the network, or through a USB drive, or SD card. But here are some suggestions for websites that will help new 3D printer owners get printing.

Finding 3D Designs

Before you can send a design to your 3D printer you need to find one or create own, of course finding a design is usually easier than creating it yourself. So here are some websites to go to find a 3D design.

  • Thingiverse – In my opinion this is the largest and best resource to find 3D printer designs. This is a great community with more and more designs uploaded everyday. You can just search a keyword of what your looking for and start scrolling. You can even create an account and upload your own designs.

Screen-Shot-2017-04-10-at-12.44.15-PM

  • MyMiniFactory – Is another great 3D printing community and there biggest draw is that all design on the site are guaranteed printable objects. So on some sites when you are trying to print an object you can have print errors. This can be a great reason for a new 3D printer owner to get designs from MyMiniFactory because there guaranteed to print. They also have a store where you can buy printed designs.

Bildschirmfoto-2016-01-15-um-11.19.11-1284x722

  • Pinshape – Is a great community where you can learn about your 3D printer and how to create 3D designs. You can also search for designs on the site and it has a nice feature of ratings so if your not sure if the design is good you can check the rating. Pinshape also has a store where you can buy printed designs. Or sell your own designs.

3D-printing-community-pinshape

 

Printing a file you downloaded

Since I have owned my 3D printer I have ran into a couple issues when trying to print a design from one of the sites above. So here are a couple recommendations I have for you.

First, is when you first start off downloading designs and printing you want to make sure you understand what the technical terms mean. An example I have run into is when I am on Thingiverse for example and have found a design I like and want to print it, if I don’t check the print settings I can end up having a fail print. So when your about to download a design make sure you get the print settings. So lets say I wanted to print this Ethernet cable runners from Thingiverse. It is not as simple as just downloading the file and printing, you always want to try to follow the print settings for the design. So for the Ethernet cable runners design the print settings are as follows:

Rafts: Yes

A Raft is a horizontal latticework of filament that is located underneath your part.  Your 3D printed part will be printed on top of this raft, instead of directly on the build platform surface. Rafts are primarily used with ABS to help with warping and bed adhesion, but they can also be used to help stabilize models with small footprints, or to create a strong foundation on which to build the upper layers of your part.

Supports: No

In general, when your model has an overhang or a bridge which is not supported by anything below, you may need to use 3D printing support structures to be able to 3D print it. To find out more about when to use supports check the tutorial at all3dp.com.

Resolution: Standard /0.20mm

Resolution is one of the crucial factors to consider when evaluating the print quality of 3D printers, especially when determining whether a machine is a high-resolution 3D printer. But manufacturers use different methods to define resolution; layer height is one commonly cited standard. Usually the lower the resolution the more detailed a print is and the longer it takes. To find out more check out this site.

Infill: 50%

Infill refers to what is filled in between  the top and bottom layer of your design. Infill has two settings the percentage on infill which means the higher the percentage the more on the inside is filled in. The second is the infill pattern which is in what pattern will the infill be printed in. To get a good idea of what infill is all about and why it is important visit this site.

Hopefully this will give you a good start on printing designs with your 3D printer. This is the first post in a series on 3D printers so let me know if you have any questions. The next post will be on 3D printer software.

Posted by David Hagy in Blog, Tutorials, 0 comments
Automate Work with PowerShell – Sending Email

Automate Work with PowerShell – Sending Email

In this blog post I am going to show you how you can use PowerShell to automate your work. I have begun using PowerShell more and more at work and found how helpful it can really be. This is something I use all the time to automate sending the same type of emails. If you have to send out emails through Outlook all the time then this automation tip will help you.

Continue reading →

Posted by David Hagy in Blog, 0 comments
Microsoft Visual Studio Code Review

Microsoft Visual Studio Code Review

There’s no shortage of code editors available and most coders have their favorite. I write PowerShell scripts for my job and until recently I used the standard PowerShell ISE to write my scripts. Microsoft Visual Studio Code has become the recommended script editor by Microsoft and here’s why.

Continue reading →

Posted by David Hagy in Blog, 0 comments
Mint Bills App Review

Mint Bills App Review

Paying bills can be a very stressful experience to many people, and there are many apps that try to make it easier. Usually these apps give you notifications to pay your bills which can be helpful, but the Mint Bills apps takes it up a notch.

Continue reading →

Posted by David Hagy in App of the Day, 0 comments
Hacked: Mobile Game of the Week!

Hacked: Mobile Game of the Week!

This week’s game is one that falls into the category of being fun and educational. There are many education based games for mobile but most of these games a created for kids to learn and play. But this game of the week is made for gamers of all ages. Here’s everything you need to know about Hacked.

Continue reading →

Posted by David Hagy in App of the Day, 0 comments
The Slow Death of Adobe Flash

The Slow Death of Adobe Flash

Adobe flash has been in the news lately with the new exploits announced and many tech blogs stating Adobe Flash needs to be removed for good. And while this is good advice to delete and forget Flash it is not that easy for businesses. So what can you do if you have to use Flash at the risk of being exploited.

Continue reading →

Posted by David Hagy in Blog, 0 comments